Learn How to Easily Replace a Quarter-Panel


Although replacing a quarter panel on your vehicle may appear overwhelming, with the proper tools and guidance, you can carry out this endeavor quite easily. In this article, we will walk you through each step of the process—offering helpful advice as well as comprehensive instructions throughout.

Tools and Materials Needed

Before you start, it’s essential to have all the necessary equipment and materials at your disposal. Here is a full list of what you’ll need:

  • Replacement
  • Body
  • Sand
  • Prim
  • Paint
  • Masking tape
  • Screwdriver
  • Drill
  • Ratchet and socket set
  • Body hammer
  • Dollies
  • Rags

Removing the Old Quarter Panel

To begin the replacement of a quarter panel, start by employing a screwdriver to eliminate any trim or molding concealing it. Then, use a power drill to unscrew and unhinge any rivets or screws securing it in place. Once you have eliminated these obstacles, carefully remove the part without damaging anything near it.

Preparing the Surface

Now that the previous quarter panel is detached, we need to prepare the area for its replacement. Start by utilizing sandpaper on any rust or other particles present. Use a body hammer and dollies to flatten out any dents or deformations in the surface next. After it’s clean and even, apply masking tape around parts you want untouched during painting later on.

Installing the New Quarter Panel

Now that the surface is ready, it’s time to attach your new quarter panel. Start by ensuring it is lined up correctly and then firmly hold the panel in its place. With a drill, secure the piece with screws through each of the factory holes included. If there are any blemishes or gaps present after installation, fill them using body filler until they’ve been completely covered and smoothed out – Once dry, sand down for an even finish!

Painting and Finishing

It’s now time to paint the recently installed quarter panel. Before you start, be sure to apply primer on both the new section and adjacent areas for a polished result. When using your chosen color of paint, ensure that all instructions are followed precisely regarding drying times before removing any masking tape or reattaching trim and mouldings. With this technique, you’ll have an outstanding final product!


Although it may appear daunting, equipping yourself with the necessary tools and knowledge can make replacing a quarter panel an effortless task. We hope this article has provided you with all of the tips needed to finish your job swiftly and successfully.

Leave a Comment

Your email address will not be published. Required fields are marked *